Order Products : sales@su-jiao.com
Braskem PE GP 100OR
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Tu6T8R_Braskem-PE-GP-100OR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The GP 100 OR is a High Density Polyethylene compounding with high molar mass, specially developed for the manufacturing of extruded pipes for gas pressurized line. This resin is produced with bimodal technology, it has excellent mechanical properties and very high resistance to internal pressure. This resin has MRS (Minimum Required Strength) of 10 MPa according to ISO 9080, and is classified as PE 100 according to ISO 12162. GP 100 OR is manufactured in orange color and it contains additives that protect it against the action of ultraviolet radiation. Meets the requirements of NBR 14462:00. Application: Orange PE 100 pressure pipes for gas distribution; jacketing of underwater cables |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 0.22 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 2.00 mm, 100% Igepal, Compression Molded, F50) | > 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 64 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 24.0 | MPa | |
| Break, Compression Molded | 36.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield, Compression Molded | 8.1 | % | |
| Break, Compression Molded | 770 | % | |
| Flexural Modulus - 1% Secant (Compression Molded) | 1240 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 350 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 72.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 126 | °C | ASTM D1525 1 |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NOVADURAN® 5010GT30 | Mitsubishi Engineering-Plastics Corp | PBT | NOVADURAN® |
| Clariant Nylon 6/6 6618G15 | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| GAPEX® RPP30EU79NA | Ferro Corporation | PP, Unspecified | GAPEX® |
| Envir® PA66G25HL-BK0101 | Barnet | Nylon 66 | Envir® |
| HiFill® PA6 GM30 L | Techmer Engineered Solutions | Nylon 6 | HiFill® |
