Order Products : sales@su-jiao.com

Qenos PE HD0390

Category:	HDPE , High Density Polyethylene
Manufacturer:	Qenos Pty Ltd
Trademark:	Qenos PE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Tq5okW_Qenos-PE-HD0390.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
HD0390 is an injection molding grade of Hign Density Polyethylene combining excellent impact resistance with high density, hardness, stiffness and toughness. HD0390 is intended for use in the production of stackable transport, storage and bottle crates and industral moldings demanding very good mechanical properties. Addition of a UV stabilizer should be considered where the intended application involves intermittent to extended esposure to sunlight. Suitability for use in any application should be determined by appropriate performance testing.

Message

HD0390 is an injection molding grade of Hign Density Polyethylene combining excellent impact resistance with high density, hardness, stiffness and toughness.

HD0390 is intended for use in the production of stackable transport, storage and bottle crates and industral moldings demanding very good mechanical properties. Addition of a UV stabilizer should be considered where the intended application involves intermittent to extended esposure to sunlight. Suitability for use in any application should be determined by appropriate performance testing.

General Information
Features	Good Toughness High Density High Hardness High Impact Resistance High Stiffness
Uses	Crates
Agency Ratings	AS 2070-1999 4.1.1(a) FDA 21 CFR 177.1520(c) 3.1a
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.955	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness	49.0	MPa	ISO 2039-1

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	29.0	MPa	ASTM D638
Flexural Modulus	1100	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (-30°C)	38	J/m	ASTM D256A

Resin Grade	Manufacturer	Category	Trademark
RoyalEdge® 5040	Lion Copolymer, LLC	EPDM	RoyalEdge®
VITAMIDE® AB36BK8525	Jackdaw Polymers	Nylon 66	VITAMIDE®
PermaStat® 400	RTP Company	PS (GPPS)	PermaStat®
POLYCASA® ACRYL KR 2015/1	Polycasa	Acrylic (PMMA)	POLYCASA® ACRYL
POLYCOMPO PP S119	POLYCOMPO Co.,Ltd.	PP, Unspecified	POLYCOMPO PP