Order Products : sales@su-jiao.com
Baytec® ME-120
| Category: | PUR-Ether/MDI , Polyurethane (Polyether, MDI) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Baytec® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TpMFgb_Baytec-ME-120.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Baytec ME-120 is a modified diphenylmethane diisocyanate (MDI)-terminated polyether prepolymer based on polytetramethylene ether glycol (PTMEG). |
| General Information | |
|---|---|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 45 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 15.0 | mg | ASTM D3489 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 34.1 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 450 | % | ASTM D412 |
| Tear Strength | |||
| -- 1 | 144 | kN/m | ASTM D624 |
| Cracking | 54 | kN/m | ASTM D1938 |
| Compression Set (70°C, 22 hr) | 27 | % | ASTM D395B |
| Bayshore Resilience | 45 | % | ASTM D2632 |
| Additional Information |
|---|
| Appearance: Pale yellow liquidNCO: 12.2 to 12.8 wt%Specific Gravity at 25°C: 1.09Specific Gravity at 65°C: 1.08Flash Point, PMCC: 248°CDensity at 25°C: 9.07 lb/galViscosity at 25°C: 4060 mPa-sViscosity at 65°C: 505 mPa-s |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Teflon® PFA 440HPA | DuPont Fluoropolymers | PFA | Teflon® PFA |
| SILVER® PET840G20 | Guangdong Silver Age Sci & Tech. Co., Ltd | PET | SILVER® |
| SNOLEN® IM 59/64 | JSC Gazprom neftekhim Salavat | HDPE | SNOLEN® |
| VENYL ST300 - 8229 | AD majoris | Nylon 6 | VENYL |
| DOWLEX™ 2098P | The Dow Chemical Company | LLDPE | DOWLEX™ |
