Order Products : sales@su-jiao.com
SOLLAMID A 2700 - A 2710
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Krisoll Resinas Plásticas Ltda. |
| Trademark: | SOLLAMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TgNwkN_SOLLAMID-A-2700---A-2710.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SOLLAMID A 2700 - A 2710 is a Polyamide 66 (Nylon 66) material. It is available in Latin America. Primary attribute of SOLLAMID A 2700 - A 2710: Flame Rated. |
| General Information |
|---|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.14 | -- | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 15 to 25 | -- | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.0 to 1.3 | -- | % | |
| Water Absorption (23°C, 24 hr) | 1.3 | -- | % | ASTM D570 |
| Heat Stability | 100 | -- | °C |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale, 23°C) | 120 | 103 | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 3000 | 1500 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 90.0 | 65.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 50 | 250 to 300 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2900 | 1300 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 120 | 50.0 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Unnotched Izod Impact Strength (23°C) | 6.0 | 12 | kJ/m² | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, Unannealed | 200 | -- | °C | |
| 1.8 MPa, Unannealed | 80.0 | -- | °C | |
| Melting Temperature | 250 to 260 | -- | °C | |
| CLTE - Flow | 7.0E-5 | -- | cm/cm/°C | ASTM D696 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | -- | ohms·cm | ASTM D257 |
| Dielectric Strength | 21 | -- | kV/mm | ASTM D149 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | V-2 | -- | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-97-T0207A-110 | Teknor Apex Company | TPE | Telcar® |
| Texalan® 2 Series 298A | Austin Novel Materials Co. Ltd. | TPU-Polyester | Texalan® 2 Series |
| KOCETAL® WR301LOGR | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
| Petrothene® GA694000X01 | LyondellBasell Industries | LLDPE | Petrothene® |
| Horda E8400 | Horda Cable Compounds | EVA | Horda |
