Order Products : sales@su-jiao.com
Hanwha Total PE B220A
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | HANWHA TOTAL PETROCHEMICALS Co., Ltd. |
| Trademark: | Hanwha Total PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TgEvXz_Hanwha-Total-PE-B220A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
B220A is a high-density polyethylene resin for blow molded bottles. This grade can be processed in conventional blow molding equipment. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.959 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | 500 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 55 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 27.5 | MPa | |
| Break | 31.4 | MPa | |
| Tensile Elongation (Break) | 500 | % | ASTM D638 |
| Apparent Bending Modulus | 1080 | MPa | ASTM D747 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -80.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 123 | °C | ASTM D1525 1 |
| Melting Temperature | 132 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.59 mm) | HB | UL 94 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 140 to 170 | °C | |
| Cylinder Zone 2 Temp. | 140 to 170 | °C | |
| Cylinder Zone 3 Temp. | 140 to 170 | °C | |
| Cylinder Zone 4 Temp. | 140 to 170 | °C | |
| Cylinder Zone 5 Temp. | 140 to 170 | °C | |
| Adapter Temperature | 160 to 200 | °C | |
| Die Temperature | 160 to 200 | °C |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E Footwear GF-6107 | S&E Specialty Polymers, LLC | PVC+NBR | S&E Footwear |
| SHIN-A SEC-365 | SHIN-A T&C | Epoxy | SHIN-A |
| Celstran® PA66-GF60-02 P11/12 | Celanese Corporation | Nylon 66 | Celstran® |
| KRYSTALGRAN™ PE499-100 | Huntsman Corporation | PUR-Eth,aliphat | KRYSTALGRAN™ |
| Iupital® TC3030 | Mitsubishi Engineering-Plastics Corp | Acetal (POM) Copolymer | Iupital® |
