Order Products : sales@su-jiao.com
Infino XI-4208
| Category: | Nylon, Unspecified , Polyamide |
| Manufacturer: | SAMSUNG SDI CO., LTD. |
| Trademark: | Infino |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Tfpc2V_Infino-XI-4208.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Infino XI-4208 is a Polyamide product filled with glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.80 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 30 | g/10 min | ASTM D1238, ISO 1133 |
| Water Absorption | |||
| 23°C, 24 hr | 0.30 | % | ASTM D570 |
| Equilibrium, 23°C, 50% RH | 0.30 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 116 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield 1 | 66.0 | MPa | ASTM D638 |
| Yield | 67.0 | MPa | ISO 527-2/5 |
| Flexural Modulus | |||
| -- 2 | 6100 | MPa | ASTM D790 |
| -- 3 | 5800 | MPa | ISO 178 |
| Flexural Strength | |||
| -- 4 | 110 | MPa | ASTM D790 |
| -- 5 | 107 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength 6(23°C) | 3.5 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact | |||
| 23°C, 3.18 mm | 39 | J/m | ASTM D256 |
| 23°C 7 | 4.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 1.8 MPa, Unannealed, 6.40 mm | 135 | °C | ASTM D648 |
| 1.8 MPa, Unannealed, 4.00 mm | 135 | °C | ISO 75-2/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 8 | 1.0E+14 | ohms | ASTM D257, IEC 60093 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| -- | 120 | °C | |
| Desiccant Dryer | 120 | °C | |
| Drying Time | |||
| -- | 2.0 to 6.0 | hr | |
| Desiccant Dryer | 2.0 to 4.0 | hr | |
| Suggested Max Moisture | < 0.050 | % | |
| Rear Temperature | 250 to 260 | °C | |
| Middle Temperature | 270 to 280 | °C | |
| Front Temperature | 290 to 300 | °C | |
| Nozzle Temperature | 300 | °C | |
| Mold Temperature | 60.0 to 120 | °C | |
| Injection Pressure | 49.0 to 245 | MPa | |
| Back Pressure | 0.490 to 1.96 | MPa | |
| Screw Speed | 50 to 150 | rpm |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 2.8 mm/min |
| 3 . | 2.0 mm/min |
| 4 . | 2.8 mm/min |
| 5 . | 2.0 mm/min |
| 6 . | Thickness: 4 mm |
| 7 . | Thickness: 4 mm |
| 8 . | 23°C, 50% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8477-70 Blue 8377 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| TAROLOX 10 G6 DX03 | Taro Plast S.p.A. | PBT | TAROLOX |
| Ferro PP TPP20AJ40UL WHITE | Ferro Corporation | PP Homopolymer | Ferro PP |
| Hyosung Polyketone M330A | Hyosung Corporation | PK-Aliphatic | Hyosung Polyketone |
| PermaStat® 600 Nat/Clear | RTP Company | ABS | PermaStat® |
