Order Products : sales@su-jiao.com
Pro-fax HP530L
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | INDELPRO, S.A. de C.V. |
| Trademark: | Pro-fax |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TesgzA_Pro-fax-HP530L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Pro-fax HP530L is a polypropylene homopolymer, designed for injection molding with slip agent that exhibits good processability. The base resin in this product meets the requirements of the FDA contained in the Code of Federal Regulations in 21 CFR 177.1520 . |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 31.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 12 | % | ASTM D638 |
| Flexural Modulus | 1130 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 35 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 93.9 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBESTA 3030 JI6L | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| Evermore PUR UDA-10XL | Evermore Chemical Industry Co., Ltd. | PUR-Ether | Evermore PUR |
| Hanwha Total PP BI518 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| ICORENE® N2002 | ICO Polymers EMEA, A Division of A. Schulman | Plastomer | ICORENE® |
| PLANAC BT-1500 | TOYOBO America, Inc. | PBT | PLANAC |
