Order Products : sales@su-jiao.com
Andur 2-60 DP/Curene® 442
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TeHgqN_Andur-2-60-DP-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 2-60DP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 60 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or by the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.14 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 61 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 21.1 | MPa | ASTM D412 |
| 300% strain | 46.7 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 51.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 310 | % | ASTM D412 |
| Compression Set | 21 | % | ASTM D395B |
| Bayshore Resilience | 50 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 2.8 | min | |
| Demold Time (100°C) | 15 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore D: 58 to 63Die C Tear, ASTM D1004: 700 pliAverage Split Tear, ASTM D1938: 260 pliStoichiometry Curative Level: 90 to 95%Mix Temperature: Andur 2-60 DP: 180-212°F Curene 442: 240°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Selvol™ 513S | Sekisui Chemical Company, Ltd. | PVOH | Selvol™ |
| SITRALON 18E-TF10-HK / C94150 black | SITRAPLAS GmbH | PC | SITRALON |
| Akulon® K224-HG8 | DSM Engineering Plastics | Nylon 6 | Akulon® |
| Gallonprene® GP420-3002 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| ENFLEX S3390A | ENPLAST Americas, a Ravago Group Company | TPE | ENFLEX |
