Order Products : sales@su-jiao.com
Isoplast® 302EZ TPU
| Category: | ETPU , Engineering Thermoplastic Polyurethane |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Isoplast® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Tcvlcy_Isoplast-302EZ-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Isoplast® 302EZ is an engineering thermoplastic polyurethane resin. Features: NSF Standard 61 Certified |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.40 to 0.60 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | ASTM D785 | ||
| M-Scale | 92 | ||
| R-Scale | 124 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1900 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 83.0 | MPa | |
| Break | 69.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 9.0 | % | |
| Break | 30 | % | |
| Flexural Modulus | 2300 | MPa | ASTM D790 |
| Flexural Strength | 97.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C, 3.20 mm | 59 | J/m | |
| 23°C, 3.20 mm | 110 | J/m | |
| Instrumented Dart Impact (23°C, Total Energy) | 68.0 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 132 | °C | |
| 0.45 MPa, Annealed | 143 | °C | |
| 1.8 MPa, Unannealed | 116 | °C | |
| 1.8 MPa, Annealed | 138 | °C | |
| Vicat Softening Temperature | 147 | °C | ASTM D1525 |
| CLTE - Flow | 5.8E-5 | cm/cm/°C | ASTM D696 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance | 88.0 | % | ASTM D1003 |
| Yellowness Index | 40 | YI | ASTM D1925 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 127 to 138 | °C | |
| Processing (Melt) Temp | 238 to 260 | °C | |
| Mold Temperature | 93.0 to 121 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RoyalEdge® 5030 | Lion Copolymer, LLC | EPDM | RoyalEdge® |
| tefabloc® TP SD 333 50A | Mitsubishi Chemical Performance Polymers, Inc. | TPE | tefabloc® |
| Adsyl 5 C 37 F | LyondellBasell Industries | Polyolefin, Unspecified | Adsyl |
| EPO-TEK® H67-MP | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Sylvin 9657-85 Clear Red 6264 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
