Order Products : sales@su-jiao.com
Borcell™ HE1123
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Borcell™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TbX9PE_Borcell-HE1123.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
It is a high density polyethylene compound intended for the insulation of radio frequency coaxial cables. Borcell HE1123 is designed to give the lowest possible cable attenuation by the selection of electrical clean feedstock and contains no additives. Borcell HE1123 is designed to be used as insulation for radio frequency coaxial cables having an extra high demand on low attenuation at high frequencies. By blending with a suitable stabilised LDPE component, such as Borcel LE1120, in an optimised ratio, prior to the extrusion, the lowest possible attenuation and good foaming properties can be achieved. Please find more information on applications below. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.963 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 1 sec) | 64 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 33.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield) | 600 | % | ISO 527-2/50 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant | IEC 60250 | ||
| 1 MHz | 2.35 | IEC 60250 | |
| 1.80 GHz | 2.35 | IEC 60250 | |
| Dissipation Factor | IEC 60250 | ||
| 1 MHz | 5.0E-5 | IEC 60250 | |
| 1.80 GHz | 6.0E-5 | IEC 60250 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 135 | °C | |
| Cylinder Zone 2 Temp. | 145 | °C | |
| Cylinder Zone 3 Temp. | 185 | °C | |
| Cylinder Zone 4 Temp. | 190 | °C | |
| Cylinder Zone 5 Temp. | 160 | °C | |
| Adapter Temperature | 135 - 140 | °C | |
| Die Temperature | 185 | °C |
| Extrusion instructions |
|---|
| Head: 130 °C |
| Note Message | |
|---|---|
| 1 . | ISO 1872-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starex SF-0941 | SAMSUNG SDI CO., LTD. | MABS | Starex |
| NIMA HL 30525 GF FR | Ovation Polymers Inc. | PET | NIMA |
| BESTPOLUX PCBM/01 | Triesa Plastics | PC+PBT | BESTPOLUX |
| Celstran® PP-GF30-0455 P10/16 | Celanese Corporation | PP, Unspecified | Celstran® |
| ICORENE® N9702 | ICO Polymers EMEA, A Division of A. Schulman | PUR-Ester | ICORENE® |
