Order Products : sales@su-jiao.com
ALTECH® PA66 A 1000/109 GY1010-07LS
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | ALBIS PLASTIC GmbH |
| Trademark: | ALTECH® PA66 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TZCPlX_ALTECH-PA66-A-1000-109-GY1010-07LS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALTECH® PA66 A 1000/109 GY1010-07LS is a Polyamide 66 (Nylon 66) product. It is available in Asia Pacific, Europe, or North America. Characteristics include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.16 | -- | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | |||
| Saturation, 23°C | 8.5 | -- | % | |
| Equilibrium, 23°C, 50% RH | 2.8 | -- | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 3300 | 1600 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 88.0 | -- | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | |||
| Yield | 4.1 | -- | % | |
| Break | -- | 50 | % | |
| Flexural Stress | 115 | 75.0 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 5.0 | -- | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | No Break | -- | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 79.0 | -- | °C | ISO 75-2/A |
| Vicat Softening Temperature | 242 | -- | °C | ISO 306/B50 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+3 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+16 | 1.0E+12 | ohms·cm | IEC 60093 |
| Comparative Tracking Index | 600 | -- | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 1.50 mm | V-2 | -- | ||
| 3.00 mm | V-2 | -- |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 80.0 | °C | |
| Drying Time - Desiccant Dryer | 2.0 to 12 | hr | |
| Suggested Max Moisture | 0.15 | % | |
| Processing (Melt) Temp | 270 to 290 | °C | |
| Mold Temperature | 40.0 to 80.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermoset Plastics 281 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| EPSeal® 100 | ELASTO | TPE | EPSeal® |
| Sylvin 5132-86 Clear Yellow 4174 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Lifoflex® UV FLAM 40700 | Müller Kunststoffe GmbH | TPE | Lifoflex® |
| ULTEM™ 3452 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
