Order Products : sales@su-jiao.com
Nanguang TPU S-95AX
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Fujian Nanguang Light Industry Co., Ltd. |
| Trademark: | Nanguang TPU |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TX4psW_Nanguang-TPU-S-95AX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nanguang TPU S-95AX is a Thermoplastic Polyurethane Elastomer product. It can be processed by injection molding and is available in Asia Pacific. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 to 1.22 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 93 to 97 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Loss | 45.0 | mg |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 10.3 | MPa | |
| 300% Strain | 32.4 | MPa | |
| Tensile Strength | 44.1 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 450 | % | ASTM D412 |
| Tear Strength (Split) | 110 | kN/m | ASTM D470 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 95.0 | °C | |
| Drying Time | 3.0 to 5.0 | hr | |
| Processing (Melt) Temp | 190 to 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ADDINYL PMD 20104 | ADDIPLAST | Nylon 66 | ADDINYL |
| Bergadur™ PB40 G15 U SO1 BK | PolyOne Corporation | PBT | Bergadur™ |
| Kepamid® 2300SU | Korea Engineering Plastics Co., Ltd | Nylon 66 | Kepamid® |
| LONGLITE® LCP LCP-300 B4TL | CCP Group | LCP | LONGLITE® LCP |
| Sumiliteresin® PR-9400 | SBHPP | Phenolic | Sumiliteresin® |
