Order Products : sales@su-jiao.com
Laprene® 83K000999
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Laprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TS2QGg_Laprene-83K000999.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Laprene® 83K000999 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Europe, Latin America, or North America for injection molding. Primary attribute of Laprene® 83K000999: REACH Compliant. Typical applications include:
|
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 77 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | 12 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 2.80 | MPa | ASTM D412 |
| Tensile Strength 2 | 12.0 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 550 | % | ASTM D412 |
| Tear Strength 4 | 53.0 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 | °C | |
| Middle Temperature | 190 | °C | |
| Front Temperature | 190 | °C | |
| Nozzle Temperature | 200 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| 4 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SWANCOR Epoxy 905-2 | SWANCOR IND. CO., LTD. | Epoxy | SWANCOR Epoxy |
| Ultra Low Outgassing™ SCV-2590 | NuSil Technology | Silicone | Ultra Low Outgassing™ |
| Beetle® PBTC130F | Teknor Apex Company (Chem Polymer) | PBT+PET | Beetle® |
| GTPO™ 8102 | S&E Specialty Polymers, LLC | TPO (POE) | GTPO™ |
| HiFill® PA4/6 CF40 HS | Techmer Engineered Solutions | Nylon 46 | HiFill® |
