Order Products : sales@su-jiao.com
ICORENE® 3570
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | ICO Polymers NA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TQdhE5_ICORENE-3570.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ICORENE® 3570 is a linear low density polyethylene for rotational molding applications.The grade is stabilized to a UV 8 and suitable for applications requiring good stiffness and processability. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.937 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693A | ||
| 10% Igepal, F50 | 185 | hr | ASTM D1693A |
| 100% Igepal, F50 | 1000 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 20.7 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant 2 | 758 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Strength (-40°C, 3.18 mm, Rotational Molded) | 77 | J | ARM |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 61.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Test data based on natural, unpigmented resin. |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® AGV 40 Black | Radici Plastics | Nylon 66 | Radilon® |
| NEFTEKHIM PE 4440R (40404) | Nizhnekamskneftekhim Inc. | MDPE | NEFTEKHIM PE |
| Alathon® M5370PX | LyondellBasell Industries | HDPE Copolymer | Alathon® |
| IDI SMC S52 (Glass Content 28%) | IDI Composites International | TS, Unspecified | IDI SMC |
| INSULCAST® 116 FR-FC-FS | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
