Order Products : sales@su-jiao.com

TEKNILID 1251

Category:	Film, Coated Al Foil , Coated Al Foil Film
Manufacturer:	Tekni-Films, a div of Tekni-Plex
Trademark:	TEKNILID
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	TQQ2cg_TEKNILID-1251.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

This data sheet describes TEKNILID 1251 product

This lid stock is made with heat seal (HS) lacquer material for Food, Pharmaceutical, and Cosmetic applications requiring a welded seal to PVC or PVDC along with high oxygen and moisture barrier performance

Aluminum Lidding Foil of 20 µm Soft Temper is used for applications requiring a "push through" feature. You push the product through the foil to access the product.

It is available with custom and standard printing

General Information
Features	Food Contact Acceptable Moisture Barrier Oxygen Barrier
Uses	Cosmetics Lids Non-specific Food Applications Pharmaceuticals
Agency Ratings	FDA Unspecified Rating USP Unspecified Rating
Forms	Film

Films	Nominal Value	Unit
Film Thickness ¹	26.1	µm
Yield	16.1	m²/kg

Additional Information	Nominal Value	Unit
Melt Temperature - of the Thermosealable Varnish	100	°C
Temperature Resistance - of the Laquer for Printing	< 220	°C

Films	Nominal Value	Unit
Tensile Strength - MD ²(Yield)	> 150	MPa
Tensile Elongation - MD ³(Break)	> 1.5	%
Seal Strength
-- ⁴	0.41	N/mm
-- ⁵	0.41	N/mm
Oxygen Transmission Rate (23°C, 100% RH)	0.0	cm³/m²/24 hr
Water Vapor Transmission Rate (38°C, 90% RH)	0.0	g/m²/24 hr

Note Message
1 .	Thickness tolerance: ±10%
2 .	of Aluminum
3 .	of Aluminum
4 .	To PVDC @ 350°F, 40psi, 0.5 sec
5 .	To PVC @ 350°F, 40psi, 0.5 sec

Resin Grade	Manufacturer	Category	Trademark
REPOL® H200MK	Reliance Industries Limited	PP Homopolymer	REPOL®
Delta GPT-10	Delta Polymers	PP Homopolymer	Delta
Geon™ Vinyl Flexible R263AM	PolyOne Corporation	PVC+NBR	Geon™ Vinyl Flexible
EPT 3090E	Mitsui Chemicals, Inc.	EPDM	EPT
EPAMOULD 660D30	Epaflex Polyurethanes S.R.L.	TPU-Polyester	EPAMOULD