Order Products : sales@su-jiao.com

NOVAPOL® TR-0735-U(UG)

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	NOVA Chemicals
Trademark:	NOVAPOL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	TP1aLw_NOVAPOL-TR-0735-U-UG-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

NOVAPOL® TR-0735-U(UG) is a Linear Low Density Polyethylene material. It is available in North America for compression molding or rotational molding.

Important attributes of NOVAPOL® TR-0735-U(UG) are:

Flame Rated

Antioxidant

Food Contact Acceptable

Good Processability

Impact Resistant

Typical applications include:

Food Contact Applications

Plumbing/Piping/Potable Water

Consumer Goods

Engineering/Industrial Parts

Household Applications

General Information
Additive	Antioxidant UV Stabilizer
Features	Antioxidant Food Contact Acceptable Good Impact Resistance Good Processability Low Density
Uses	Engineering Parts Household Goods Outdoor Applications Toys
Agency Ratings	FDA 21 CFR 176.170(c), Table 2, Cond. C FDA 21 CFR 176.170(c), Table 2, Cond. D FDA 21 CFR 176.170(c), Table 2, Cond. E FDA 21 CFR 176.170(c), Table 2, Cond. F FDA 21 CFR 176.170(c), Table 2, Cond. G FDA 21 CFR 176.170(c), Table 2, Cond. H FDA 21 CFR 177.1520(c) 3.2a NSF 14 NSF 24 NSF 61
Forms	Pellets
Processing Method	Compression Molding Rotational Molding

Physical	Nominal Value	Unit	Test Method
Density	0.935	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	7.0	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance
50°C, 10% Igepal, Compression Molded, F50	> 1000	hr	ASTM D1693B
50°C, 100% Igepal, Compression Molded, F50	> 1000	hr	ASTM D1693A

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 1.90 mm, Compression Molded)	17.1	MPa	ASTM D638
Tensile Elongation ²(Yield, 1.90 mm, Compression Molded)	12	%	ASTM D638
Flexural Modulus - 1% Secant (Compression Molded)	680	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
ARM Impact - Rotational Molded			ARM
-40°C, 3.18 mm	68.0	J
-40°C, 6.35 mm	203	J

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed	58.0	°C
1.8 MPa, Unannealed	42.0	°C
Peak Melting Temperature	125	°C	ASTM E794

Flammability	Nominal Value		Test Method
Flame Rating	HB		UL 94

Note Message
1 .	Type IV, 51 mm/min
2 .	Type IV, 51 mm/min

Resin Grade	Manufacturer	Category	Trademark
Vexel 3100	Custom Resins Group	PBT	Vexel
Generic PPS - Carbon Fiber	Generic	PPS	Generic
KRALASTIC® AN-491 R-1	Nippon A&L Inc.	ABS	KRALASTIC®
LIHAN® A707MO	Nanjing Lihan Chemical Co., Ltd.	Nylon 66	LIHAN®
LEXAN™ EXL9112 resin	SABIC Innovative Plastics	PC	LEXAN™