Order Products : sales@su-jiao.com
RTP 4187
| Category: | PEKK , Polyetherketoneketone |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TK1Fm5_RTP-4187.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. Carbon Fiber 40% |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.44 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.10 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 33800 | MPa | ASTM D638 |
| Tensile Strength | 262 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 1.0 | % | ASTM D638 |
| Flexural Modulus | 30300 | MPa | ASTM D790 |
| Flexural Strength | 386 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | 75 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.20 mm) | 590 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 316 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+6 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | V-0 | UL 94 |
| Additional Information |
|---|
| Dew Point: -20°FDTUL at 264 psi, ASTM D648: >600°FMoisture Content: 0.1%Volume Resistivity, ASTM D257: <1000000 ohm-cm |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 149 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 377 - 382 | °C | |
| Mold Temperature | 149 - 232 | °C | |
| Injection Pressure | 103 - 138 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BESTNYL SE25VI02AX | Triesa Plastics | Nylon 66 | BESTNYL |
| Jam PE 43X01 | Jam Petrochemical Company | HDPE | Jam PE |
| Jamplast JPPCABSI | Jamplast, Inc. | PC+ABS | Jamplast |
| Elastoprene HS5065A TR NAT | KMI Group, Inc. | TPE | Elastoprene |
| Moplen HP552R | LyondellBasell Industries | PP Homopolymer | Moplen |
