Order Products : sales@su-jiao.com
PRIMALENE WPP731
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Southern Polymer, Inc. |
| Trademark: | PRIMALENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TK0gBL_PRIMALENE-WPP731.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
An 11.0 melt index high density polyethylene Applications:
Features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.951 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 11 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 25.5 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 500 | % | ASTM D638 |
| Flexural Modulus - Tangent | 1210 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 50 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 77.0 | °C | ASTM D648 |
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nylene® BX3WQ662 | Custom Resins Group | Nylon 6 | Nylene® |
| Hanwha Total PP BI452 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| Magnobond 6289 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
| OmniPro™ TPO 20M HC | OMNI Plastics, LLC | TPO | OmniPro™ |
| Fortron® 1132L4 | Celanese Corporation | PPS | Fortron® |
