Order Products : sales@su-jiao.com
Mecoline S RDX 1209 F
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Melos GmbH |
| Trademark: | Mecoline |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | THAkel_Mecoline-S-RDX-1209-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Halogen-free, low smoke, highly oil and extra fuel resistant radiation cross-linkable, max. operating temperature 145°C, flame retardant compound of low and medium voltage cables for General Installation applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.53 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (150°C/21.6 kg) | 15 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 45 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | IEC 811-1-1 | ||
| -- 1 | > 13.5 | MPa | |
| -- 2 | > 10.0 | MPa | |
| Tensile Strain | IEC 811-1-1 | ||
| Break 3 | > 180 | % | |
| Break 4 | > 220 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (145°C, 3000 hr) | -1.5 | % | IEC 811-1-2 |
| Change in Tensile Strain at Break in Air (145°C, 3000 hr) | -26 | % | IEC 811-1-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Set 5 | IEC 540 | ||
| Elongation under load | 15 | % | |
| Residual elongation | 5.0 | % |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 165 to 185 | °C | |
| Extruder Screw L/D Ratio | 20.0:1.0 to 25.0:1.0 | ||
| Extruder Screw Compression Ratio | 1.0:1.2 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 34 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 110 to 130 | °C | |
| Cylinder Zone 2 Temp. | 120 to 140 | °C | |
| Cylinder Zone 3 Temp. | 130 to 150 | °C | |
| Cylinder Zone 4 Temp. | 140 to 160 | °C | |
| Cylinder Zone 5 Temp. | 150 to 170 | °C | |
| Adapter Temperature | 155 to 175 | °C | |
| Die Temperature | 170 to 190 | °C |
| Note Message | |
|---|---|
| 1 . | After crosslinking |
| 2 . | Before crosslinking |
| 3 . | After crosslinking |
| 4 . | Before crosslinking |
| 5 . | at 200°C/15min/0.2 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Promyde® B243 HS | NUREL, S.A. | Nylon 6 | Promyde® |
| Rhelon F2538AH-01 | RheTech, Inc. | Nylon 66 | Rhelon |
| Hanwha Total PP BJ501X | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP Impact Copolymer | Hanwha Total PP |
| LTP ZW-3210 | Chengdu Letian Plastics Co., Ltd | Acetal (POM) Copolymer | LTP |
| PENTAMID A GV30 H LS black | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
