Order Products : sales@su-jiao.com
KRATON® D1171 P
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TH3wen_KRATON-D1171-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1171 P is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. Is is supplied from North America in the form below:
Kraton D1171 P can be used as a base material for hot melt adhesives. It may also find use as a base material for compound formulations and as a modifier for bitumen. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 11 | g/10 min | ISO 1133 |
| Solution Viscosity 1 | 1000 | mPa·s | Internal Method |
| Bound Styrene | 18.1 to 21.1 | % | Internal Method |
| Antioxidant Additive | 0.080 to 0.70 | % | Internal Method |
| Ash Content - T, Talc | 0.2 to 0.4 | wt% | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.50 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 26.0 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 45 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 2.07 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 6.89 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 1300 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | 25 wt% toluene solution at 25°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RIALGLASS H 07 S 25 GT | RIALTI Srl | PP Homopolymer | RIALGLASS |
| RTP 200 D TFE 13 SI 2 | RTP Company | Nylon 612 | RTP |
| Toyolac® 700 X01 | Toray Plastics (Malaysia) Sdn. Bhd. | ABS | Toyolac® |
| UNITHENE® LH614 | USI Corporation | HDPE | UNITHENE® |
| Elastocon® CLR65 | Elastocon TPE Technologies | TPE | Elastocon® |
