Order Products : sales@su-jiao.com
apinat® DP2343
| Category: | Biodeg Polymers , Biodegradable Polymers |
| Manufacturer: | API SpA |
| Trademark: | apinat® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TG9fyt_apinat-DP2343.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| apinat®DP2343 is a biodegradable polymer (Biodeg Polymers) product,. It can be processed by extrusion or injection molding and is available in Europe. The main features are: environmental protection/green. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 - 1.29 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 - 72 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 14.0 - 27.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 10 - 400 | % | ASTM D638 |
| Flexural Modulus | 550 - 1050 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 58.0 - 100 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 130 - 140 | °C | |
| Middle Temperature | 140 - 150 | °C | |
| Front Temperature | 140 - 150 | °C | |
| Nozzle Temperature | 140 - 155 | °C | |
| Mold Temperature | 25.0 - 40.0 | °C | |
| Injection Rate | Slow-Moderate |
| Injection instructions |
|---|
| Injection Pressure: MediumBack Pressure: Medium/Low |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 130 - 140 | °C | |
| Cylinder Zone 2 Temp. | 140 - 150 | °C | |
| Cylinder Zone 3 Temp. | 140 - 150 | °C | |
| Cylinder Zone 4 Temp. | 140 - 155 | °C | |
| Cylinder Zone 5 Temp. | 135 - 145 | °C |
| Extrusion instructions |
|---|
| L/D ratio: 24:1Compression Screw Ratio: 2.3:1Screw Speed: 50 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E PVC GA-7056 | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E PVC |
| WACKER® FC 205 | Wacker Chemie AG | Silicone | WACKER® |
| EcoLon® 2200-BK1 | Wellman Engineering Resins | Nylon 66 | EcoLon® |
| ELEVATE™ EB502 | Westlake Chemical Corporation | EVA | ELEVATE™ |
| POLYFLON™ F-201 | DAIKIN AMERICA, INC. | PTFE | POLYFLON™ |
