Order Products : sales@su-jiao.com
VYLOPET® EMC320R
| Category: | PC+PBT , Polycarbonate + PBT |
| Manufacturer: | TOYOBO America, Inc. |
| Trademark: | VYLOPET® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TCk2nz_VYLOPET-EMC320R.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
VYLOPET®EMC320R is a polycarbonate polybutene terephthalate (PC PBT) product,. It is available in North America. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.60 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.00 mm) | 0.90 0.30 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.060 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 110 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
| Flexural Modulus | 8000 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 180 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, CS-17 Wheel) | 28.0 | mg | ASTM D1044 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 60 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 240 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 215 | °C | ASTM D648 |
| Melting Temperature | 255 | °C | DSC |
| CLTE - Flow | 3.0E-5 | cm/cm/°C | ASTM D696 |
| RTI Elec | 130 | °C | UL 746 |
| RTI Imp | 130 | °C | UL 746 |
| RTI | 130 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+18 | ohms·cm | ASTM D257 |
| Dielectric Strength (2.00 mm) | 25 | kV/mm | ASTM D149 |
| Arc Resistance | 130 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information |
|---|
| Ball Pressure Temperature, UL746, Method B: 225 °CComparative Tracking Index, IEC Pub1.112: Class 2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 255 - 265 | °C | |
| Mold Temperature | 90.0 - 120 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MBA ABS 4152 | MBA Polymers | ABS | MBA ABS |
| Primefin V500MI12 | Lucent Polymers, Inc. | PP Homopolymer | Primefin |
| WPP PP WPP331H | Washington Penn Plastic Co. Inc. | PP Copolymer | WPP PP |
| Nipol® AR 22 | Zeon Corporation | Rubber | Nipol® AR |
| NITRIFLEX N-386 B | NITRIFLEX | NBR | NITRIFLEX |
