Order Products : sales@su-jiao.com
Hostalen GX 9254
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Hostalen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TCYav5_Hostalen-GX-9254.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hostalen GX 9254 is a high density polyethylene resin which possesses an outstanding combination of stiffness and impact performance. Hostalen GX 9254 can be processed on blown film lines at high output rates with excellent bubble stability, very low gel levels and homogeneous appearance which converters and end-users require for high quality thin and thick film production. Hostalen GX 9254 can enable the production of films with a very broad conversion window, good lay flat properties and excellent roll configuration. Typical applications are lamination and release films, artificial paper, bags and heavy duty packaging. Foodlaw compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/21.6 kg | 8.8 | g/10 min | |
| 190°C/5.0 kg | 0.30 | g/10 min |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 20 | µm | |
| Film Thickness - Recommended / Available | 10 to 200 µm | ||
| Tensile Strength | ISO 527-3 | ||
| MD : 20 µm, Blown Film | 75.0 | MPa | |
| TD : 20 µm, Blown Film | 65.0 | MPa | |
| Tensile Elongation | ISO 527-3 | ||
| MD : Break, 20 µm, Blown Film | 400 | % | |
| TD : Break, 20 µm, Blown Film | 430 | % | |
| Dart Drop Impact (20 µm, Blown Film) | > 300 | g | ASTM D1709 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 200 to 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 208 | RTP Company | Nylon 66 | RTP |
| TEKAMID™ TA210HI | Mando Advanced Materials Co., Ltd. | Nylon 66 | TEKAMID™ |
| UBE Nylon 5033 FDX27 | UBE Engineering Plastics, S.A. | Nylon 66/6 | UBE Nylon |
| DOW™ LLDPE 1050B | The Dow Chemical Company | LLDPE | DOW™ LLDPE |
| ESTOPLAST EP 4030GY05 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
