Order Products : sales@su-jiao.com
Elastamax™ XL-2055
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Elastamax™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TBwRuV_Elastamax-XL-2055.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PolyOne's Elastamax™ XL thermoplastic olefins (TPOs) are based on pelletized blends of polyolefin resins and select elastomers such EPDM. These materials have been engineered to provide a balance of physical properties and processability, and are an economical alternative to traditional thermoset rubber and more costly thermoplastic elastomers. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 54 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ASTM D412A | ||
| 100% Strain | 2.96 | MPa | |
| 300% Strain | 3.93 | MPa | |
| Tensile Strength 2(Break) | 5.31 | MPa | ASTM D412A |
| Tensile Elongation 3(Break) | 620 | % | ASTM D412A |
| Tear Strength 4 | 26.3 | kN/m | ASTM D624 |
| Compression Set (23°C, 22 hr) | 30 | % | ASTM D395B |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| 3 . | 510 mm/min |
| 4 . | Die C, 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMALLOY® A1800 | Mitsubishi Chemical Performance Polymers, Inc. | TPE | PRIMALLOY® |
| Vipel® F774-PTA-30 | AOC, L.L.C. | Polyester Alloy | Vipel® |
| Evermore PUR SA-2130M | Evermore Chemical Industry Co., Ltd. | PUR, Unspecified | Evermore PUR |
| Hanwha Total PE P11CB | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | HDPE | Hanwha Total PE |
| OmniCarb™ PC/PET 325 | OMNI Plastics, LLC | PC+PET | OmniCarb™ |
