Order Products : sales@su-jiao.com
Toppyl SP 2001 B
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Toppyl |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TBh80S_Toppyl-SP-2001-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Toppyl SP 2001 B is a fully formulated seal peel solution especially developed for the blown ?lm technology. This product has been designed to offer a peelable seal to PE substrates or to seal & peel against itself and is suitable for non-sterilisable applications. Toppyl SP 2001 B is a solution created to replace completely the sealing layer in a coextruded ?lm. It provides a constant easy-opening force over a wide sealing temperature window and is readily processable on conventional equipment in both mono and co-extruded structures. EU and FDA compliance information about this product can be found in separate product documentation. This product is not intended for use in medical and pharmaceutical applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 0.80 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (vs. Itself - Dynamic) | 0.25 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus - MD | 200 | MPa | ASTM D882 |
| Tensile Strength - MD | ASTM D882 | ||
| Yield | 12.0 | MPa | ASTM D882 |
| Fracture | 28.0 | MPa | ASTM D882 |
| Tensile Elongation - MD (Break) | 580 | % | ASTM D882 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 95.0 | °C | ISO 306/A50 |
| Melting Temperature | 113 | °C | DSC |
| Additional Information |
|---|
| Recommended processing temperatures: 170°C to 230°C. In cases were higher temperatures are required please contact your appropriate technical contact for support. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAISOX 8003 | Formosa Plastics Corporation | HDPE | TAISOX |
| Ducor® 1184 L | Ducor Petrochemicals BV | PP Homopolymer | Ducor® |
| Huafon T27 | Huafon Group Co., Ltd. | Nylon 66 | Huafon |
| Lutene® XL8080UC | LG Chem Ltd. | PE, Unspecified | Lutene® |
| Plaslube® J-50/10/TF/15 BK223 | Techmer Engineered Solutions | PC | Plaslube® |
