Order Products : sales@su-jiao.com
TITANZEX® HI1600
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Lotte Chemical Titan (M) Sdn. Bhd. |
| Trademark: | TITANZEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TB9as6_TITANZEX-HI1600.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TITANZEX® HI1600 is a High Density Polyethylene material. It is available in Asia Pacific for injection molding. Primary attribute of TITANZEX® HI1600: Good Processability. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.957 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | 2.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 27.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 40 | % | ASTM D638 |
| Apparent Bending Modulus | 981 | MPa | ASTM D747 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 20 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 122 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mowital® B 30 HH | Kuraray Co., Ltd. | PVB | Mowital® |
| ADEKA YG-108 | Adeka Corporation | PUR-Ester | ADEKA |
| AMPLIFY™ TY 1353 | The Dow Chemical Company | MAH-g | AMPLIFY™ TY |
| Elastollan® B 98 A | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| LOFEX® A31LL | Lotte Chemical Corporation | PET | LOFEX® |
