Order Products : sales@su-jiao.com
Estane® 58311 TPU
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | T9v1OG_Estane-58311-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane® 58311 is an 85A aromatic Polyether-Based Thermoplastic Polyurethane (TPU). Features: Very good physical properties, hydrolysis resistance, low temperature performance and abrasion. Wide processing window for extrusion. Uses: Flat Die/Cast Film Extrusion, Profile Extrusion |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 82 - 88 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (200% Strain) | 14 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 100% strain, 0.762mm | 6.20 | MPa | ASTM D412 |
| 300% strain, 0.762mm | 11.7 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 45.5 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 520 | % | ASTM D412 |
| Tear Strength | |||
| 0.762 mm 1 | 68.6 | kN/m | ASTM D624 |
| Cracking | 21 | kN/m | ASTM D470 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Volume (23°C, 24 hr, in water) | 1.3 | % | ASTM D471 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -49.0 | °C | DSC |
| Melting Temperature | 135 | °C | DSC |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 171 | °C | |
| Cylinder Zone 2 Temp. | 177 | °C | |
| Cylinder Zone 3 Temp. | 182 | °C | |
| Cylinder Zone 4 Temp. | 188 | °C | |
| Adapter Temperature | 188 | °C | |
| Melt Temperature | 185 | °C | |
| Die Temperature | 188 | °C |
| Extrusion instructions |
|---|
| Dew Point: -40°CScreen Pack Recommendation: 20/40/80/20 |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirathane™ H590 | Miracll Chemicals Co., Ltd. | TPU, Unspecified | Mirathane™ |
| Gallonprene® GP310-7002 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| HIDEN® F500 | YUHWA Korea Petrochemical Ind. Co., Ltd. | HDPE | HIDEN® |
| Lion Idemitsu Composites PPS K531A1 | Lion Idemitsu Composites Co., Ltd. | PPS | Lion Idemitsu Composites PPS |
| SCHULABLEND® (ABS/PA) M/MK 6101 GF8 U | A. Schulman Europe | ABS+Nylon | SCHULABLEND® |
