Order Products : sales@su-jiao.com
Braskem PE SGE7252
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem America Inc. |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | T6S2tY_Braskem-PE-SGE7252.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SGE7252 is a bimodal High Density Polyethylene specially developed for the manufacturing of caps and closures that require high stress cracking resistance. The minimum biobased content of this grade is 96%, determined according to ASTM D6866. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.952 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 2.00 mm, 10% Igepal, Compression Molded, F50) | 40.0 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Compression Molded) | 55 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Compression Molded | 26.0 | MPa | |
| Break, Compression Molded | 14.0 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Yield, Compression Molded | 9.0 | % | |
| Break, Compression Molded | 400 | % | |
| Flexural Modulus (Compression Molded) | 1200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (Compression Molded) | 5.0 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 72.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 125 | °C | ISO 306/A |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Biobased Content | > 96 | % | ASTM D6866 |
| Note Message | |
|---|---|
| 1 . | 0.3 mm notched-plaques |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC V903 NAT601 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| RJM 901-W | RJM International, Inc. | Acetal (POM) Copolymer | RJM |
| SLOVAMID® 6 SGF 30 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Generic PUR-Ester | Generic | PUR-Ester | Generic |
| P-FLEX R 2620 | Putsch Kunststoffe GmbH | ABS | P-FLEX |
