Order Products : sales@su-jiao.com
Forprene® 6NE901A45
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Forprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | T0CZn8_Forprene-6NE901A45.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Forprene®6NE901A45 is a thermoplastic vulcanized rubber (TPV) material,. This product is available in North America, Latin America or Europe. The processing method is: extrusion. Forprene®The main characteristics of 6NE901A45 are: compliance with REACH standards. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 45 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | 8 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 1.40 | MPa | ASTM D412 |
| Tensile Strength 2 | 3.50 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 470 | % | ASTM D412 |
| Tear Strength 4 | 17.0 | kN/m | ASTM D624 |
| Compression Set 5(70°C, 22 hr) | 34 | % | ASTM D395B |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 180 | °C | |
| Die Temperature | 170 | °C |
| Extrusion instructions |
|---|
| Extrusion Head Temperature: 180°C |
| Note Message | |
|---|---|
| 1 . | Mouth die c |
| 2 . | Mouth die c |
| 3 . | Mouth die c |
| 4 . | C mould |
| 5 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PONACOM ABS 7410-12 | Ponachem Compound GmbH | ABS | PONACOM ABS |
| VAMPAMID 6 3028 V2 MF | Vamp Tech | Nylon 6 | VAMPAMID |
| New-prene™ 8380N | Total Polymer Vision (Suzhou) Co., LTD | PP+EPDM | New-prene™ |
| 4MID® 9B22130 I5 | 4Plas | Nylon 6 | 4MID® |
| Hifax CA60A NA 598F ANTHRACITE | LyondellBasell Industries | PP, Unspecified | Hifax |
