Order Products : sales@su-jiao.com
Marlex® 9035
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Chevron Phillips Chemical Company LLC |
| Trademark: | Marlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SyiGmv_Marlex-9035.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Marlex® 9035 is a High Density Polyethylene material. It is available in Latin America or North America for injection molding. Important attributes of Marlex® 9035 are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 40 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | < 10.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | < 100 | % | ASTM D638 |
| Flexural Modulus - Tangent 3 | 979 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature 4 | < -75.0 | °C | ASTM D746A |
| Vicat Softening Temperature | 115 | °C | ASTM D1525 5 |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| 3 . | 13 mm/min |
| 4 . | Type 1 specimen |
| 5 . | Rate A (50°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAN T-19H | POLYMA Kunststoff GmbH & Co. KG | ABS | POLYLAN |
| Cosmic Epoxy E4920FC | Cosmic Plastics, Inc. | Epoxy | Cosmic Epoxy |
| Flontech® FT-EK5-CF5-6 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| KOCETAL® GF304BK | Kolon Plastics, Inc. | Acetal (POM) Copolymer | KOCETAL® |
| Novalloy-E E10 | PlastxWorld Inc. | ABS | Novalloy-E |
