Tefzel® HT-2183 Datasheet,ETFE,DuPont Fluoropolymers-SHANGHAI SUSHENG

Tefzel® HT-2183

Category:	ETFE , Ethylene Tetrafluoroethylene Copolymer
Manufacturer:	DuPont Fluoropolymers
Trademark:	Tefzel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	SyhpMp_Tefzel-HT-2183.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
DuPont™ Tefzel ® HT-2183 fluoropolymer is a premium resin available in translucent, 2.5-mm (0.1-in) pellets. Compared with other grades of Tefzel ®, its most unique features are a greatly enhanced flex life and resistance to environmental stress. Tefzel ® HT-2183 and the other Tefzel ® fluoropolymers are melt processible, modified copolymers of ethylene and tetrafluoroethylene. They are high-performance resins that can be processed at relatively high rates compared with other fluorocarbon resins. They are mechanically tough and offer an excellent balance of properties. Tefzel ® HT-2183 is preferred for applications where other thermoplastics are lacking in mechanical toughness; broad thermal capability; ability to meet unusual thermal, mechanical, and chemical environmental extremes; or limited by fabricating problems. Examples are components and linings for the chemical industry and molded parts with metal inserts or thick sections for use at high temperatures. Properly processed products made from neat Tefzel ® HT-2183 are inert to most solvents and chemicals, hydrolytically stable, and weather-resistant. The recommended upper service temperature is 155°C (311°F); useful properties are retained at cryogenic ranges. The level and stability of dielectric properties are excellent and the flame rating is V-0 by the UL94 method. They are resistant to environmental stress cracking and have outstanding impact strength, cutthrough, and abrasion resistance. Statements, or data, regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions. Typical End Products Tefzel ® HT-2183 is ideal for many end products, including chemical service items, such as lined valves and fittings, pump housings and impellers, column packings, and other abrasion-resistant linings; high-temperature electrical components and insulation; fasteners, corrugated tubing, and duct work; and film.

Message

DuPont™ Tefzel ® HT-2183 fluoropolymer is a premium resin available in translucent, 2.5-mm (0.1-in) pellets. Compared with other grades of Tefzel ®, its most unique features are a greatly enhanced flex life and resistance to environmental stress.

Tefzel ® HT-2183 and the other Tefzel ® fluoropolymers are melt processible, modified copolymers of ethylene and tetrafluoroethylene. They are high-performance resins that can be processed at relatively high rates compared with other fluorocarbon resins. They are mechanically tough and offer an excellent balance of properties.

Tefzel ® HT-2183 is preferred for applications where other thermoplastics are lacking in mechanical toughness; broad thermal capability; ability to meet unusual thermal, mechanical, and chemical environmental extremes; or limited by fabricating problems. Examples are components and linings for the chemical industry and molded parts with metal inserts or thick sections for use at high temperatures.

Properly processed products made from neat Tefzel ® HT-2183 are inert to most solvents and chemicals, hydrolytically stable, and weather-resistant. The recommended upper service temperature is 155°C (311°F); useful properties are retained at cryogenic ranges. The level and stability of dielectric properties are excellent and the flame rating is V-0 by the UL94 method. They are resistant to environmental stress cracking and have outstanding impact strength, cutthrough, and abrasion resistance. Statements, or data, regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions.

Typical End Products
Tefzel ® HT-2183 is ideal for many end products, including chemical service items, such as lined valves and fittings, pump housings and impellers, column packings, and other abrasion-resistant linings; high-temperature electrical components and insulation; fasteners, corrugated tubing, and duct work; and film.

General Information
Features	High ESCR (Stress Cracking Resistance) Copolymer Solvent resistance Impact resistance, high Good electrical performance Good wear resistance Good chemical resistance Good weather resistance Good toughness Hydrolysis stability
Uses	Abrasion Resistant Liners Films Pump parts Lining Electrical/Electronic Applications Electronic insulation Valve/valve components Pipe fittings Fasteners Accessories
Appearance	Translucent
Forms	Particle
Processing Method	Blow molding Extrusion Resin transfer molding Compression molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.70	g/cm³	ASTM D792
Apparent Density	1.30	g/cm³	Internal method
Melt Mass-Flow Rate (MFR) (297°C/5.0 kg)	6.0	g/10 min	ASTM D3159
Water Absorption (24 hr)	7.0E-3	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	67		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (23°C)	40.0	MPa	ASTM D638
Tensile Elongation (Break, 23°C)	300	%	ASTM D638
Flexural Modulus (23°C)	1000	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	No Break		ASTM D256

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	255 - 280	°C	ASTM D3418
CLTE - Flow (0 to 100°C)	1.3E-4	cm/cm/°C	ASTM D696
Maximum Service Temperature	155	°C	UL 746

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+17	ohms·cm	ASTM D257
Dielectric Strength (0.250 mm)	70	kV/mm	ASTM D149
Dielectric Constant (23°C, 1 MHz)	2.50 - 2.60		ASTM D1531
Dissipation Factor (23°C, 1 MHz)	7.2E-3		ASTM D1531

Flammability	Nominal Value	Unit	Test Method
Flame Rating	V-0		UL 94
Oxygen Index	30 - 32	%	ASTM D2863

Additional Information
Weather and Chemical Resistance: Excellent

Resin Grade	Manufacturer	Category	Trademark
TPX® RT18	Mitsui Chemicals America, Inc.	PMP Copolymer	TPX®
ALTECH® PA6 A 4020/100 MR20	ALBIS PLASTIC GmbH	Nylon 6	ALTECH® PA6
Andur 2-95 AP/Curene® 442	Anderson Development Company	PUR-Ether/TDI	Andur
CYCOLOY™ CM8722 resin	SABIC Innovative Plastics	PC+ABS	CYCOLOY™
Lotryl® BESTPEEL 2407	Arkema	EMA	Lotryl®