Order Products : sales@su-jiao.com

ISPLEN® PP 090 G2M

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	REPSOL
Trademark:	ISPLEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	SxvWe7_ISPLEN-PP-090-G2M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ISPLEN® PP 090 G2M is a polypropylene homopolymer with a very high fluidity intended for injection moulding. It is characterised by good flow properties that facilitates an easy mould filling and short cycle times with big articles. Articles manufactured with this grade have excellent chemical resistance, are easily decorated and can accept different colouring systems. TYPICAL APPLICATIONS ISPLEN® PP 090 G2M is widely used for the production of consumer goods such us: Food containers. Rigid packaging. Garden and domestic furniture. Pistons for one use syringes, needle covers and other lab equipment. Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

Message

ISPLEN® PP 090 G2M is a polypropylene homopolymer with a very high fluidity intended for injection moulding. It is characterised by good flow properties that facilitates an easy mould filling and short cycle times with big articles. Articles manufactured with this grade have excellent chemical resistance, are easily decorated and can accept different colouring systems.

TYPICAL APPLICATIONS
ISPLEN® PP 090 G2M is widely used for the production of consumer goods such us:

Food containers.

Rigid packaging.

Garden and domestic furniture.

Pistons for one use syringes, needle covers and other lab equipment.

Recommended melt temperature range from 190 to 250°C. Processing conditions should be optimised for each production line.

General Information
Features	Fast Molding Cycle Food Contact Acceptable Good Chemical Resistance Good Colorability Good Moldability High Flow
Uses	Food Containers Furniture Labware Packaging Rigid Packaging
Agency Ratings	EU Food Contact, Unspecified Rating
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.905	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	35	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	72		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus	1650	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	2.5	kJ/m²	ISO 179

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	80.0	°C	ISO 75-2/B

Injection	Nominal Value	Unit
Processing (Melt) Temp	190 to 250	°C

Resin Grade	Manufacturer	Category	Trademark
RxLOY™ NPP00NR02NA	Ferro Corporation	PP Alloy	RxLOY™
ESTABIO PL 0560 T10	Cossa Polimeri S.r.l.	Biodeg Polymers	ESTABIO
Karina IVORY PVC COMPOUND 810D35/1-C-AC-AS	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
PETOPLEN EH 251	PETKIM Petrokimya Holding A.S.	PP, Unspecified	PETOPLEN
LNP™ KONDUIT™ RTF2B compound	SABIC Innovative Plastics	Nylon 66	LNP™ KONDUIT™