Order Products : sales@su-jiao.com
Beetle® PET110
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | Teknor Apex Company (Chem Polymer) |
| Trademark: | Beetle® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SuVB1L_Beetle-PET110.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PBTC115F is a reinforced PBT/PET alloy containing 15% glass fiber. It achieves the best balance of mechanical properties and heat resistance, with excellent surface finish and mold release. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.34 - 1.50 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 2000 - 2600 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 65.0 - 85.0 | °C | ISO 75-2/A |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Filler Content | 0.0 - 25 | % | Internal method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 140 | °C | |
| Drying Time | 4.0 | hr | |
| Cylinder Zone 1 Temp. | 260 - 300 | °C | |
| Cylinder Zone 3 Temp. | 260 - 300 | °C | |
| Cylinder Zone 5 Temp. | 260 - 300 | °C | |
| Melt Temperature | < 300 | °C |
| Extrusion instructions |
|---|
| Polyester grades are very sensitive to moisture content during processing. Suitable pre-drying is essential. Excess moisture causes rapid hydrolytic degradation of the melt and severe impairment of mechanical properties. Low melt viscosity & brittle product are often the key indicators. Vacuum or dehumidified air driers must be used. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen HP420J | PolyMirae | PP Homopolymer | Moplen |
| VAMPAMID HT 0024 V0 | Vamp Tech | PPA | VAMPAMID |
| ENVIROPLAS® ENV13-NC160 | ENVIROPLAS®, Inc. | PC | ENVIROPLAS® |
| LNP™ THERMOCOMP™ EX93452 compound | SABIC Innovative Plastics | PEI | LNP™ THERMOCOMP™ |
| Zytel® 73G30TGI BK267 | DuPont Performance Polymers | Nylon 6 | Zytel® |
