Order Products : sales@su-jiao.com
Hypel® PELLD5/.935
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Entec Polymers |
| Trademark: | Hypel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SmxdvN_Hypel-PELLD5-935.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hypel® PELLD5/.935 is a Linear Low Density Polyethylene material. It is available in North America. Important attributes of Hypel® PELLD5/.935 are:
Typical application of Hypel® PELLD5/.935: Food Contact Applications |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.933 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 18.6 | MPa | ASTM D638 |
| Tensile Elongation 1(Yield, 23°C) | 12 | % | ASTM D638 |
| Flexural Modulus 2(23°C) | 689 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Strength (23°C, 3.18 mm) | 88 | J | ARM |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 50.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TC4GPN (Series: GP/FG) | KRAIBURG TPE | TPE | THERMOLAST® K |
| DENYL HT 6010 | Vamp Tech | PPA | DENYL |
| FHR EPS 54-S7454 | Flint Hills Resources, LP | PS (EPS) | FHR EPS |
| LNP™ LUBRICOMP™ LL004C compound | SABIC Innovative Plastics | PEEK | LNP™ LUBRICOMP™ |
| OP - ABS ABS 25CCF | Oxford Polymers | ABS | OP - ABS |
