Order Products : sales@su-jiao.com
Xuchuan 2000/B-8580
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Xuchuan Chemical (Suzhou) Co., Ltd |
| Trademark: | Xuchuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SmmaGc_Xuchuan-2000-B-8580.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Xuchuan 2000/B-8580 is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) product. It is available in Asia Pacific. Typical application: Consumer Goods. Primary characteristic: good dimensional stability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.280 to 0.380 | g/cm³ | |
| Density | |||
| A-2000 : 40°C | 1.010 to 1.020 | g/cm³ | |
| B-8580 : 40°C | 1.080 to 1.200 | g/cm³ | |
| Viscosity | |||
| A-2000 : 40°C | 1.00 to 1.40 | Pa·s | |
| B-8580 : 40°C | 0.600 to 1.00 | Pa·s |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Cream Time | 7.0 to 9.0 | sec | |
| End of Rise Time | 50.0 to 60.0 | sec |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Free Rise Foam Density | 130 to 160 | kg/m³ | |
| Preheat Temperature | |||
| Part A | 50 to 60 | °C | |
| Part B | 50 to 60 | °C | |
| Preheat Time | |||
| Part A | 8.0 to 10.0 | hr | |
| Part B | 8.0 to 12.0 | hr | |
| Processing Temperature | |||
| Part A | 40 to 45 | °C | |
| Part B | 38 to 42 | °C |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore C) | 27 to 40 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (Break) | 4.00 to 6.00 | MPa | |
| Tensile Elongation (Break) | 300 to 380 | % | |
| Tear Strength | 18.0 to 26.0 | kN/m |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100 | ||
| Part B | Mix Ratio by Weight: 71 to 73 | ||
| Demold Time | 5.0 to 7.0 | min |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 45.0 to 55.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Thermoplastic Polyolefin FT3080-425 | RheTech, Inc. | Polyolefin, Unspecified | RheTech Thermoplastic Polyolefin |
| ARMAMID® PA SVMN 30.1 | Poly Plastic | Nylon 6 | ARMAMID® |
| Idemitsu PS HT57M | Idemitsu PS | PS (GPPS) | Idemitsu PS |
| TOTAL Polyethylene Aceso® PEM 2440 | TOTAL Refining & Chemicals | LDPE | TOTAL Polyethylene |
| LNP™ THERMOCOMP™ MX99432 compound | SABIC Innovative Plastics | PP, Unspecified | LNP™ THERMOCOMP™ |
