Order Products : sales@su-jiao.com
Jam PE 32604
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Sig8zZ_Jam-PE-32604.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam PE 32604 is a Linear Low Density Polyethylene product. It can be processed by rotational molding and is available in Africa & Middle East. Primary characteristic: high escr (stress crack resistant). |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.932 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 17.5 | MPa | |
| Break, Compression Molded | 14.0 | MPa | |
| Tensile Elongation (Break, Compression Molded) | > 800 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 600 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 105 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ESTAPROP 1006 | Cossa Polimeri S.r.l. | PP Homopolymer | ESTAPROP |
| DENILUB Y 00U 0Mo Nat 01 | Vamp Tech | Nylon 66 | DENILUB |
| Dynaflex™ G7960-1 NSFG | PolyOne Corporation | TPE | Dynaflex™ |
| Plaslube® PEEK CTG30 A 002 | Techmer Engineered Solutions | PEEK | Plaslube® |
| POLYfill PPH GF5020 PD2 VT2 | Polykemi AB | PP Homopolymer | POLYfill |
