Order Products : sales@su-jiao.com
En Chuan 6133WAL
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | En Chuan Chemical Industries Co,. Ltd. |
| Trademark: | En Chuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SiQOG0_En-Chuan-6133WAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin contains wax and is non-thixotropy. It contains water clear accelerator. The outstanding characteristics of this resin is good transparency and great compatibility with fiberglass mat. It is a specialized resin in producing corrugated roofing board. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Barcol Hardness 1 | 38 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus 2 | 6880 | MPa | ASTM D790 |
| Flexural Strength 3 | 210 | MPa | ASTM D790 |
| Additional Information |
|---|
| Transparent Accelerator, CO-oct (CO 6%): .5%Hardener, MEKPO (PO content, 55%): 1% |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (25°C) | 1.11 - 1.13 | g/cm³ | |
| Viscosity (25°C) | 0.40 - 0.60 | Pa·s | |
| Gel Time (25°C) | 3.5 - 7.0 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Modulus 4 | 8040 | MPa | |
| Tensile Strength 5 | 108 | MPa |
| Note Message | |
|---|---|
| 1 . | Barcol 934-1 , Unfilled |
| 2 . | Filled |
| 3 . | Filled |
| 4 . | Filled |
| 5 . | Filled |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wondel® A AN0F | Nanjing Julong Engineering Plastics Co., LTD | Nylon 66 | Wondel® A |
| Alcryn® 4680 BK | Advanced Polymer Alloys | MPR | Alcryn® |
| Electrafil® ABS CF30 BK | Techmer Engineered Solutions | ABS | Electrafil® |
| MAJORIS BT231 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
| Syncure™ System S150V | PolyOne Corporation | XLPE | Syncure™ |
