Order Products : sales@su-jiao.com
ExxonMobil™ LDPE LD 503.LP
| Category: | LDPE , Low Density Polyethylene Resin |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | ExxonMobil™ LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Si77cy_ExxonMobil-LDPE-LD-503-LP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LD 503.LP is a low density polyethylene homopolymer suitable for molding, extrusion, granulation and foam applications. |
| General Information | |
|---|---|
| Additive |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.3 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A, 15 seconds | 84 | ASTM D2240 | |
| Shaw D, 15 seconds | 45 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 10.6 | MPa | ASTM D638 |
| Fracture | 9.38 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 40 | % | ASTM D638 |
| Fracture | > 800 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 216 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Instrumented Dart Impact | ASTM D3763 | ||
| -40°C | 25.8 | J | ASTM D3763 |
| 23°C | 17.6 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 88.0 | °C | ASTM D1525 |
| Legal statement |
|---|
| 有关潜在食品接触应用合规信息（例如：FDA、EU、HPFB），请与埃克森美孚化工客户服务代表联系。本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E Wire & Cable GF-91-102-2 | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E Wire & Cable |
| SCHULADUR® A GF30 | A. Schulman Inc. | PBT | SCHULADUR® |
| Shin-Etsu Elastomer KEG-2000-40A/B | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| Sup-tech B103F | Shanghai Suptech Engineering Plastics Co. Ltd. | Nylon, Unspecified | Sup-tech |
| ICORENE® N9503 | ICO Polymers EMEA, A Division of A. Schulman | SAN | ICORENE® |
