Order Products : sales@su-jiao.com
Thermoset Plastics UR-105
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Sgztg1_Thermoset-Plastics-UR-105.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics UR-105 is a Polyurethane material. It is available in North America for potting. Important attributes of Thermoset Plastics UR-105 are:
Typical application of Thermoset Plastics UR-105: Wire & Cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.938 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.18 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 25 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 0.827 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 130 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 1700 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 3.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 MHz) | 3.20 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.029 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 9.0 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Thermoset Mix Viscosity (25°C) | 1500 | cP | ASTM D2393 |
| Demold Time (25°C) | 1400 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEFTEKHIM PP 1523J (EXPPTQ) | Nizhnekamskneftekhim Inc. | PP Homopolymer | NEFTEKHIM PP |
| Delrin® 100 NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| EcoLon® GF3004-BK1 | Wellman Engineering Resins | Nylon 6 | EcoLon® |
| HiFill® PEEK GF30 HF | Techmer Engineered Solutions | PEEK | HiFill® |
| KOPA® KN173ST3R | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
