Order Products : sales@su-jiao.com
DJSilicone NE-8135
| Category: | Silicone , Silicone |
| Manufacturer: | DONGJUE SILICONE (NANJING) CO., LTD |
| Trademark: | DJSilicone |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SgNN5H_DJSilicone-NE-8135.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| With better tensile strength, elongation and tear strength than common and general silion rubber, high-strength silicone rubber for molding is suitable for molding products with higher mechanical property requirements. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 to 1.15 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 33 to 37 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | < 6 | % | ASTM D412 |
| Tensile Strength (Yield) | > 6.50 | MPa | ASTM D412 |
| Tensile Elongation (Break) | > 550 | % | ASTM D412 |
| Tear Strength | > 17.0 | kN/m | ASTM D624 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| REPOL® AMI035N | Reliance Industries Limited | PP Impact Copolymer | REPOL® |
| Selvol™ 540 | Sekisui Chemical Company, Ltd. | PVOH | Selvol™ |
| BONDYRAM® 6000 | Polyram Ram-On Industries | ABS | BONDYRAM® |
| Hostaform® S 27064 | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| Iupilon® HL-4000 | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
