Order Products : sales@su-jiao.com
Mecoline IS RDX 5235 F
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Melos GmbH |
| Trademark: | Mecoline |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SgFOo7_Mecoline-IS-RDX-5235-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Motor lead wires for coil connections, class F motors and transformers, pumps, solenoids, Internal wiring of appliances, sensor wires, flexible battery cables and wire insulation of lovv voltage multicore cables for road vehicles. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.25 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 50 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | 16.0 | MPa | IEC 811-1-1 |
| Tensile Strain | |||
| Break 2 | 340 | % | IEC 811-1-1 |
| Break, -55°C | > 30 | % | IEC 811-1-4 |
| Abrasion | 150 | Cycles |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Set 3 | IEC 540 | ||
| Elongation under load | 40 | % | |
| Residual elongation | < 10 | % |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 145 to 155 | °C | |
| Extruder Screw L/D Ratio | >24.0:1.0 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60167 |
| Electric Strength | 25 | kV/mm | EN 60243-1 |
| Dielectric Constant (20°C, 50 Hz) | 3.10 | IEC 60250 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 | °C | |
| Drying Time | 4.0 | hr | |
| Cylinder Zone 1 Temp. | 130 to 140 | °C | |
| Cylinder Zone 2 Temp. | 140 to 150 | °C | |
| Cylinder Zone 3 Temp. | 145 to 155 | °C | |
| Cylinder Zone 4 Temp. | 145 to 155 | °C | |
| Cylinder Zone 5 Temp. | 145 to 155 | °C | |
| Adapter Temperature | 145 to 155 | °C | |
| Die Temperature | 145 to 155 | °C |
| Note Message | |
|---|---|
| 1 . | Before crosslinking |
| 2 . | Before crosslinking |
| 3 . | at 200°C/15min/0.2 MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NuSil MED1-6604 | NuSil Technology | Silicone | NuSil |
| Dryflex® 662500S | ELASTO | SEBS | Dryflex® |
| Fusabond® C250 | DuPont Packaging & Industrial Polymers | EVA | Fusabond® |
| LG PVC LS100E | LG Chem Ltd. | PVC Homopolymer | LG PVC |
| DEXFLEX® 727-UV 4LLA | LyondellBasell Industries | PP, Unspecified | DEXFLEX® |
