Order Products : sales@su-jiao.com

TOTAL Polystyrene Crystal 525L

Category:	PS (GPPS) , General Purpose Polystyrene
Manufacturer:	TOTAL Refining & Chemicals
Trademark:	TOTAL Polystyrene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	SdvXYG_TOTALPolystyreneCrystal525L.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Polystyrene 525L: Is a crystal polystyrene with low residuals that is ideally suited for blending with clear elastomers for extrusion-thermoforming applications that require low odor and taste. Total Petrochemicals 525L can also be used as a cap layer for coextrusion applications that require a glossy finish, or in injection molding. Injection molding applications such as medical and laboratory parts, tumblers and jewel boxes demonstrate the polymer's ability to be molded with minimal stresses and fast cycles. Application: Blending with clear styrenic elastomers Cutlery Coextrusion capping Medical applications General Information: This material complies with FDA requirements as described in 21 CFR §177.1640. This material holds Underwriters Laboratory recognition 94HB; see UL File E55470 at www.UL.com. USP Class VI Material Safety Data Sheets are available to help customers satisfy their safety needs.

Message

Polystyrene 525L: Is a crystal polystyrene with low residuals that is ideally suited for blending with clear elastomers for extrusion-thermoforming applications that require low odor and taste. Total Petrochemicals 525L can also be used as a cap layer for coextrusion applications that require a glossy finish, or in injection molding. Injection molding applications such as medical and laboratory parts, tumblers and jewel boxes demonstrate the polymer's ability to be molded with minimal stresses and fast cycles.

Application:

Blending with clear styrenic elastomers

Cutlery

Coextrusion capping

Medical applications

General Information:

This material complies with FDA requirements as described in 21 CFR §177.1640.

This material holds Underwriters Laboratory recognition 94HB; see UL File E55470 at www.UL.com.

USP Class VI

Material Safety Data Sheets are available to help customers satisfy their safety needs.

General Information
Features	Good Gloss Low Residuals Fast molding cycle The smell is low to none The smell is low to none
Uses	Mixing Disposable tableware Medical/nursing supplies
Agency Ratings	FDA 21 CFR 177.1640 USP Class VI
UL File Number	E55470
Forms	Particle
Processing Method	Co-extrusion molding Extrusion Thermoforming Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.04	g/cm³
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	9.0	g/10 min	ASTM D1238
Molding Shrinkage - Flow	0.40 - 0.70	%	ASTM D955
Moisture		%

Thermal	Nominal Value	Unit	Test Method
Heat Distortion - Annealed	93	°C	ASTM D648

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3030	MPa	ASTM D638
Tensile Strength	46.2	MPa	ASTM D638
Flexural Modulus	3100	MPa	ASTM D790
Flexural Strength	93.1	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	101	°C	ASTM D1525

Flammability	Nominal Value		Test Method
Flame Rating	HB		UL 94

Resin Grade	Manufacturer	Category	Trademark
Sarlink® TPE ML-1240D BLK 111	Teknor Apex Company	TPE	Sarlink® TPE
Unichem 3876	Colorite Polymers	PVC, Unspecified	Unichem
Akulon® Diablo HT-HG6 (K-X07031)	DSM Engineering Plastics	Nylon 66/6	Akulon®
Clariant Nylon 6 PA-213XO32	Clariant Corporation	Nylon 6	Clariant Nylon 6
ALTECH® PA66 ECO 1000/517	ALBIS PLASTIC GmbH	Nylon 66	ALTECH® PA66