Order Products : sales@su-jiao.com
BCC Resins BC 7062R
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | BCC Products Inc. |
| Trademark: | BCC Resins |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SbfrfH_BCC-Resins-BC-7062R.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BC 7062 are aluminum filled, low viscosity epoxy mass casting resins. These room temperature cure systems allow the user choice thicknesses of 1/8 inch to a maximum of 6 inches without foaming or yielding excessive shrinkage. Casting thicknesses may be increased by incorporating aluminum needles, puffs or granules. BC 7062, when properly cured, provides nearly perfect reproduction, resulting in a dimensionally stable, hard, tough surface. For use in constructing duplicate models, prototypes, patterns, facing dies, etc. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 1.0, Mix Ratio by Volume: 1.0 | ||
| Resin | Mix Ratio by Weight: 12, Mix Ratio by Volume: 6.5 | ||
| Pot Life 1(24°C) | 50 to 60 | min | |
| Thermoset Mix Viscosity 2(24°C) | 5400 | cP | ASTM D2393 |
| Demold Time | 720 to 1100 | min | |
| Post Cure Time | |||
| 24°C | 120 | hr | |
| 66°C | 3.0 to 4.0 | hr |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Casting Thickness | 0.125 to 0.750 |
| Note Message | |
|---|---|
| 1 . | 2 lb mass |
| 2 . | Brooksfield |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Xuchuan XCY-5565A | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Arak HDPE EX3B (GM5010T2) | Shazand (Arak) Petrochemical Corporation | HDPE | Arak HDPE |
| Chemlon® A30 | Teknor Apex Company (Chem Polymer) | Nylon 66 | Chemlon® |
| FLEXAREN® 14006 | Innospec Leuna GmbH | EVA | FLEXAREN® |
| ALCOM® AHT 530/40 | ALBIS PLASTIC GmbH | PC+ABS | ALCOM® AHT |
