Sarlink® TPE OM-1354 Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Sarlink TPE OM series are high performance specialty thermoplastic elastomers designed for automotive applications requiring excellent bondability to engineered resin substrates. Sarlink TPE OM-1354 is a medium hardness, low density, opaque grade that exhibits excellent adhesion to nylon (polyamide).

General Information
Features	Low Specific Gravity Low density Workability, good Adhesiveness Good coloring Good adhesion Good chemical resistance Medium hardness
Uses	Handle overmolding Application in Automobile Field Car interior parts Soft touch application Soft handle Rubber substitution Knob Bonding
RoHS Compliance	RoHS compliance
Appearance	Opacity Available colors
Forms	Particle
Processing Method	Multiple injection molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.918	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	33	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shaw A	56	ASTM D2240
Shaw A, 5 seconds	54	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D412
Transverse flow : Fracture	3.38	MPa	ASTM D412
Flow : Fracture	4.07	MPa	ASTM D412
Tensile Elongation			ASTM D412
Transverse flow : Fracture	280	%	ASTM D412
Flow : Fracture	440	%	ASTM D412
Tear Strength			ASTM D624
Transverse flow	21.0	kN/m	ASTM D624
Flow	19.3	kN/m	ASTM D624

Additional Information
Excellent adhesion to nylon (PA)

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Drying Temperature	66	°C
Drying Time	2.0 - 4.0	hr
Rear Temperature	204 - 232	°C
Middle Temperature	210 - 232	°C
Front Temperature	216 - 238	°C
Nozzle Temperature	221 - 243	°C
Processing (Melt) Temp	221 - 243	°C
Mold Temperature	24 - 60	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.862	MPa
Screw Speed	50 - 120	rpm
Cushion	3.81 - 25.4	mm

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	SZkn4F_SarlinkTPEOM1354.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Polyopt® BLS64	Suzhou OMAY Optical Materials Co., Ltd	Film, PS	Polyopt®
Sylvin 6208-70 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Trivin™ 212	Vi-Chem Corporation	PVC, Unspecified	Trivin™
K-Bin Rigid PVC KB-6108	K-Bin, Inc.	PVC, Unspecified	K-Bin Rigid PVC
Sylvin 3290-90 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin