Order Products : sales@su-jiao.com
KRATON® D0243 B
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SZZ5K9_KRATON-D0243-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D0243 B is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from South America in the phycial form identified below.
Kraton D0243 B is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 20 | g/10 min | ASTM D1238 |
| Antioxidant Additive 1 | 0.35 to 0.48 | % | Internal Method |
| Ash Content - T, Talc | 0.35 to 0.75 | % | Internal Method |
| Polystyrene Content | 31 to 35 | % | Internal Method |
| Solution Viscosity - (Toluene) 25%wt (25°C) | 170 to 430 | mPa·s | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 1.0 | % | Internal Method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Diblock Content | 75.0 | ||
| Styrene/Rubber ratio | 33/67 | ||
| Vinyl Polybutadiene Content - Null | 35 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec, Compression Molded) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 2(300% Strain) | 1.03 | MPa | ASTM D412 |
| Tensile Strength 3(Yield) | 1.72 | MPa | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| 2 . | Typical properties determined on film cast from toluene solution |
| 3 . | Typical properties determined on film cast from toluene solution |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| GAPEX® RPP30EA36HB | Ferro Corporation | PP Homopolymer | GAPEX® |
| Grilamid® XE 4208 black 9992 | EMS-GRIVORY | Nylon 612 | Grilamid® |
| Hostaform® C 13021 RM | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| Kumho PPG 3601 | Korea Kumho Petrochemical Co., Ltd. | POP | Kumho PPG |
| Integra™ PC 5022 FD 0002 | PolySource, LLC | PC | Integra™ |
