Order Products : sales@su-jiao.com
Softflex® 3910
| Category: | TPE Alloy , Thermoplastic Elastomer Alloy |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Softflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SYeFwv_Softflex-3910.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Softflex® 3910 is a Thermoplastic Elastomer Alloy (TPE Alloy) product. It is available in North America. Typical application: Engineering/Industrial Parts. Characteristics include:
|
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity (Natural) | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1 | ASTM D1238 | ||
| 200°C/5.0 kg | 2.6 | g/10 min | |
| 230°C/21.6 kg | 0.90 | g/10 min | |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 23°C, 3.18 mm, Injection Molded | 1.9 | % | |
| Across Flow : 23°C, 3.18 mm, Injection Molded | 1.7 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 1 sec, 23°C, 3.18 mm, Injection Molded | 90 | ||
| Shore A, 10 sec, 23°C, 3.18 mm, Injection Molded | 88 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (23°C, 1000 Cycles, 1000 g, H-22 Wheel) | 0.248 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (100% Strain) | 14 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 50% Strain | 7.08 | MPa | |
| 100% Strain | 8.03 | MPa | |
| 300% Strain | 10.3 | MPa | |
| Tensile Strength 2(Yield) | 10.4 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 330 | % | ASTM D412 |
| Tear Strength (23°C, 3.18 mm) | 53.4 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 22 hr 3 | 47 | % | |
| 70°C, 22 hr | 94 | % | |
| 100°C, 22 hr | 96 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Impact (-30°C, 3.18 mm, Injection Molded) | 14.3 | J | ASTM D5420 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Overmold Bonding | ABS, PC, ABS/PC, PPO |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | 510 mm/min |
| 3 . | Method B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Miramid® DK2520CW | BASF Leuna GmbH | Nylon 6 | Miramid® |
| ChronoPrene™ 25A | CardioTech International, Inc. | TPE | ChronoPrene™ |
| Delta PCR-1G20 | Delta Polymers | PC | Delta |
| Mafill® CR XT 4344 | Ravago Group | PP Copolymer | Mafill® |
| For-Tec E OC8OAZ (Series: AD/PAX/CR) | KRAIBURG TPE | TPE | For-Tec E |
