Order Products : sales@su-jiao.com
UNITIKA Nylon 6 A1030TF
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | UNITIKA Plastics Division |
| Trademark: | UNITIKA Nylon 6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SYFvCd_UNITIKA-Nylon-6-A1030TF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UNITIKA Nylon 6 A1030TF is a Polyamide 6 (Nylon 6) material. It is available in Asia Pacific or North America. Primary attribute of UNITIKA Nylon 6 A1030TF: Lubricated. Typical applications include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.18 | 1.18 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow : 3.20 mm | 1.8 | 1.8 | % | |
| Flow : 3.20 mm | 1.5 | 1.5 | % | |
| Water Absorption | ISO 62 | |||
| 23°C, 24 hr | 1.6 | 1.6 | % | |
| Equilibrium, 23°C, 50% RH | 2.5 | 2.5 | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 116 | 95 | ISO 2039-2 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 2700 | 840 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 68.0 | 42.0 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | |||
| Yield | 4.0 | -- | % | |
| Break | 15 | 28 | % | |
| Flexural Modulus | 2500 | 800 | MPa | ISO 178 |
| Flexural Stress | 90.0 | 30.0 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 3.0 | 12 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength | 82 | 120 | kJ/m² | ISO 179 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 120 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 53.0 | -- | °C | ISO 75-2/A |
| CLTE - Flow | 8.0E-5 | 8.0E-5 | cm/cm/°C | ISO 11359-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 3.0E+15 | 7.0E+14 | ohms·cm | IEC 60093 |
| Dielectric Constant (1 MHz) | 3.40 | -- | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.020 | -- | IEC 60250 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Altuglas® MI-7T | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Altuglas® |
| Evatane® 33-400 | Arkema | EVA | Evatane® |
| FMC® 200 | Smooth-On, Inc | Polysulfide Rubber | FMC® |
| Hostalen CRP 100 S orange-yellow | LyondellBasell Industries | HDPE | Hostalen |
| Sumiliteresin® PR-51350B | SBHPP | Phenolic | Sumiliteresin® |
