Order Products : sales@su-jiao.com
En Chuan 6030
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | En Chuan Chemical Industries Co,. Ltd. |
| Trademark: | En Chuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SXNdWd_En-Chuan-6030.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This resin contains wax and red accelerator. It is suitable for coating decorative plywood. It can achieve glossy surface by film process. |
| General Information | |
|---|---|
| Uses |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Barcol Hardness 1 | 45 | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 4080 | MPa | ASTM D790 |
| Flexural Strength | 115 | MPa | ASTM D790 |
| Additional Information |
|---|
| Red Accelerator, Co-oct (Co 6%): .5%Hardener, MEKPO (PO content, 55%): 1% |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (25°C) | 1.11 - 1.13 | g/cm³ | |
| Viscosity (25°C) | 0.30 - 0.50 | Pa·s | |
| Gel Time (25°C) | 2.5 - 5.0 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 54.9 | MPa |
| Note Message | |
|---|---|
| 1 . | Barcol 934-1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205B FR | RTP Company | Nylon 610 | RTP |
| IDI SMC E5V-204 | IDI Composites International | TS, Unspecified | IDI SMC |
| Iupilon® MB2105 | Mitsubishi Engineering-Plastics Corp | PC+Polyester | Iupilon® |
| LNP™ LUBRICOMP™ OX88533 compound | SABIC Innovative Plastics | PPS | LNP™ LUBRICOMP™ |
| POLYfill PPH GF5020 PD1 | Polykemi AB | PP Homopolymer | POLYfill |
