Order Products : sales@su-jiao.com
Pearlthane® D11H92S
| Category: | TPU-Capro , Thermoplastic Polyurethane Elastomer (Polycaprolactone) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Pearlthane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SUvbZw_Pearlthane-D11H92S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type : Pearlthane® D11H92S is a polycaprolactone copolyester-based thermoplastic polyurethane. Main Application : Injection Moulding Special Features : Excellent flow and mechanical properties and an outstanding low compression set value and high temperature resistance. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.15 | g/cm³ | ISO 2781 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 868 | ||
| Shore A, 1 sec | 92 | ||
| Shore D, 1 sec | 46 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (500 mm) | 46.0 | MPa | ISO 527-2/5A |
| Tensile Strain (Break, 500 mm) | 460 | % | ISO 527-2/5A |
| Abrasion Resistance | 20.0 | mm³ | ISO 4649-A |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ISO 527-2 | ||
| 100% Strain, 500 mm | 10.0 | MPa | |
| 300% Strain, 500 mm | 21.0 | MPa | |
| Tear Strength 2 | 130 | kN/m | ISO 34-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | ISO 306/A50 | ||
| -- 3 | 133 | °C | |
| -- 4 | 139 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 3.0 | hr | |
| Rear Temperature | 190 | °C | |
| Middle Temperature | 195 | °C | |
| Front Temperature | 195 | °C | |
| Nozzle Temperature | 200 | °C | |
| Mold Temperature | 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Type 5 |
| 2 . | Method Ba, Angle (Unnicked) |
| 3 . | Unannealed |
| 4 . | Annealed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Caltex PP MG43SI | GS Caltex | PP, Unspecified | Caltex PP |
| CompaMid® PA 6 GF 30 HI | DimeLika Plast GmbH | Nylon 6 | CompaMid® |
| Fluoroplex COMP 25 RJ - GMP | UNIFLON | PTFE | Fluoroplex |
| Flontech® FT-CARR25-FM-3 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Hostacom 6551 | LyondellBasell Industries | PP Homopolymer | Hostacom |
