Order Products : sales@su-jiao.com
Formolene® L42009M
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | SS6e3A_Formolene-L42009M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® L42009M is a general-purpose film grade linear low density made using gas-phase technology. The resin exhibits excellent toughness and strength when drawn down to thin gauges. Formolene® L42009H meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.95 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 25 µm, Blown Film | 35.2 | MPa | |
| TD : Break, 25 µm, Blown Film | 22.2 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm, Blown Film | 700 | % | |
| TD : Break, 25 µm, Blown Film | 820 | % | |
| Elmendorf Tear Strength 1 | |||
| MD : 25.0 µm | 61.8 | kN/m | ASTM D1922 |
| TD : 25.0 µm | 154.4 | kN/m |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dart Impact (25.0 µm) 2 | 52.1 | kN/m | ASTM D1709 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gardner Gloss (45°, 25.0 µm, Blown Film) | 36 | ASTM D523 | |
| Haze (25.0 µm, Blown Film) | 27 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | Blown Film |
| 2 . | Blown Film |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BESTNYL SC00VI02AH15 | Triesa Plastics | Nylon 66/6 | BESTNYL |
| APEX® 126 | Teknor Apex Company | PVC, Flexible | APEX® |
| Cleapact TI-300 | DIC Corporation | SBC | Cleapact |
| Flontech® FT-EK5-CF5-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| MAJORIS BT210 | AD majoris | PP, Unspecified | MAJORIS |
